Alpha and Omega Semiconductor launch I2C controllable EZBuck regulator to power next generation chipsets and FPGAs



Alpha and Omega Semiconductor, a designer, developer and supplier of a range of power semiconductors and power ICs, introduced on Thursday its new family of EZBuck regulators featuring I2C control. The first two members of the family are the 4A AOZ2231CQI-01 and the 8A AOZ2233CQI-02.

The devices provide a compact, efficient power converter solution for next-generation chipsets and FPGAs used in high-end TVs, set-top boxes, data storage systems, servers and other embedded systems. They also include integration advantages of the EZBuck line of products. Combining AOS’ benchmark MOSFET technology with advanced packaging technology enables high-performance DC/DC regulators in a compact footprint.

AOS’ performance MOSFETs enable high efficiency over the entire load range, and light load efficiency gets a further boost with an optional pulse frequency mode (PFM). Both the 4A and the 8A devices are available in footprint compatible QFN 4 x 4mm package allowing designers an easy upgrade path as power requirements increase.

The devices operate over a wide input voltage range of 6.5V to 28V and have a built-in 5.3V regulator making single supply operation possible. The proprietary COT architecture provides ultra-fast load transient response performance and allows stable and low voltage ripple operation with small size ceramic capacitors.

Competing solutions require several external components when using all ceramic capacitors and need to generate a larger output ripple voltage to stabilize the circuit. Additionally, the input feed forward feature provides a constant switching frequency over the entire input voltage range, which further alleviates noise concerns for designers.

Next generation microprocessors and SoCs often use dynamic voltage scaling to reduce power dissipation and improve system performance. Implementing dynamic voltage scaling in a DC/DC converter often requires several external components. The 4A, AOZ2231CQI-01 and the 8A AOZ2233CQI-02 make the design of such converters simple by allowing the system designer to control the output voltage from 0.6V to 1.79V using an I2C interface with 9.375mV steps.

“The new family of I2C controllable EZBuck regulators offer maximum flexibility to the user by allowing not only simplified output voltage selection for dynamic voltage scaling or margining purposes, but also to configure operation and protection behavior of the converter using the I2C interface,” said Rex Liu, Power IC Marketing at AOS. “This makes the design of complex distributed power systems far simpler.”

The AOZ2231CQI-01 and the AOZ2233CQI-02 are immediately available in production quantities with a lead-time of 12 weeks. The unit price for 1,000 pieces is $1.43 for the AOZ2231CQI-01 and $1.86 for the AOZ2233CQI-02.

 

Leave a Reply

WWPI – Covering the best in IT since 1980